Finned Coils:

Built using inner grooved copper tube with a ½” diameter, manufactured in accordance with CUPROCLIMA® specifications, with corrugated aluminum fins. High performance rates can be achieved with these coils.

Every coil has passed a leakage test under a rated pressure of 3,923 kPa (40kg/cm2) and pressurized using nitrogen at 147 kPa (1.5kg/cm2) in order to avoid the corrosion of the inner surface of the copper tubes.

Casework:

The structure of the cooling unit’s casing is manufactured in galvanized steel plating painted with epoxy-polyester paint external surface option, baked at 180°C to achieve a high resistance to corrosion even under extreme atmospheric conditions. Metal protection on connec­tions and return bends.

The panels are easy to disassemble from the casework, providing easy and quick access to the inside of the unit cooler.

Designed with internal partitions to avoid the “by-pass” effect during the sequential operation of fans.

The air output can be guided with replaceable covers.

Fans and motors:

Factory equipped with EC fans (Electronically Commuted); high-efficiency fans.

Three-phase motors with a 630 mm diameter, IP54, 380/480V, 50/60Hz, 2.9kW, 4.6A, 1,200 rpm.

Available air pressure: up to 200 Pa.

Motors are hosted inside a metallic support that can be easily accessed.

Advantages:

• Easy installation and maintenance.
• Low noise levels.
• Coils in “V-shaped” configuration.
• Saves space in machinery rooms.
• Interchangeable air outlet panels.
• Energy savings.