Finned coils:

Built using copper tubes with a 1/2” diameter, manufactu­red according to CUPROCLIMA® specifications, with aluminum corrugated fins. High performance rates can be achieved with these coils.

Fin spacing is 3.5 mm (XR series) and 6 mm (XC series).

Every coil has passed a leakage test under a rated pressure of 3,923 kPa (40 kg/cm2) and pressurized using nitrogen at 147 kPa (1.5 kg/cm2) in order to avoid the corrosion of the inner surface of the copper tubes.

Casework:

The casing structure of the unit cooler is manufactured with a plate of aluminum-magnesium alloy (97.5% Al – 2.5% Mg) giving it a high protection against corrosion even under extreme environmental con­ditions.

The drip trays and endplates are easy to disassemble from the casework, providing easy and quick access to the inside of the unit.

Fans and motors:

Fans have a 300 mm diameter and they are equipped with single-phase motors (230 V / 50-60 Hz).

Electric defrosting:

They are shielded with a stainless steel tube and their terminals are vulcanized over it to avoid electric shunts; every heater includes a single ground wire.

They are strategically located across the finned coil in order to achieve suitable and uni­form defrosting.

Electric heaters are included in the XC series and are optional in the XR series.